Asphalt Crack Filling Machine: What it is and How it Works
If you’re involved in road construction or maintenance, you know that cracks in asphalt can be a significant problem. Not only do they look unsightly, but they can also lead to more significant damage if left untreated. That’s where an asphalt crack filling machine comes in.
What is an Asphalt Crack Filling Machine?
An asphalt crack filling machine is a piece of equipment designed to fill cracks in asphalt pavement. It’s a self-contained unit that combines a heated hose and an applicator wand with a material reservoir. The machine is mounted on a trailer or truck and is designed to be used on highways, parking lots, and other large pavement surfaces.
How Does an Asphalt Crack Filling Machine Work?
The process of using an asphalt crack filling machine is relatively simple. Here are the basic steps:
- Clean the Crack: The first step is to clean the crack thoroughly. This involves removing any debris, dirt, or vegetation from the crack. A wire brush, air compressor, or high-pressure water jet can be used to clean the crack.
- Heat the Material: Once the crack is clean, the next step is to heat the crack filler material. The material is typically a hot rubberized asphalt emulsion. The heating process makes the material more fluid and easier to apply.
- Apply the Material: Once the material is heated, it’s time to apply it to the crack. The applicator wand is used to dispense the material directly into the crack. The material is applied in a continuous stream, starting at one end of the crack and working to the other end.
- Smooth the Material: Once the material is applied, it needs to be smoothed out. A squeegee or trowel can be used to smooth the material and ensure it’s level with the surrounding pavement.
- Allow the Material to Cure: The final step is to allow the crack filler material to cure. The curing process can take several hours, depending on the temperature and humidity. Once the material is cured, the crack should be completely sealed, preventing further damage to the pavement.
Why Use an Asphalt Crack Filling Machine?
Using an asphalt crack filling machine has several benefits. Here are a few:
- Saves Time: Filling cracks manually can be a time-consuming process. Using an asphalt crack filling machine speeds up the process significantly, allowing you to fill more cracks in less time.
- Saves Money: When cracks are left untreated, they can lead to more significant damage that requires more extensive repairs. Using an asphalt crack filling machine to fill cracks as soon as they appear can save you money in the long run by preventing more significant damage.
- Provides a More Effective Seal: An asphalt crack filling machine provides a more effective seal than filling cracks manually. The machine heats the material, ensuring that it’s more fluid and can penetrate deeper into the crack, resulting in a more effective seal.
- Improves Safety: Cracks in pavement can be a safety hazard, especially for vehicles and pedestrians. Using an asphalt crack filling machine to fill cracks helps to eliminate these hazards, making roads and parking lots safer for everyone.
Roadsky and Asphalt Crack Filling Machine
Whether you’re working on a highway, parking lot, or other pavement surface, an asphalt crack filling machine can help you get the job done quickly and effectively. Roadsky is a professional road crack repair equipment supplier, if you want to know more about asphalt crack filling machine, you can contact us directly.